16G101-2 Drawing Rules and Standard Detailing Drawings of Ichnographic Representing Method for Construction Drawings of R.C. Structures (Cast-in-situ concrete slab-stairs) is the revised version of 11G101-2 Drawing Rules and Standard Detailing Drawings of Ichnographic Representing Method for Construction Drawings of R.C. Structures (Cast-in-situ concrete slab-stairs). According to the updated codes GB 18306-2015 Seismic ground motion parameters zonation map of China, GB 50011-2010 Code for seismic design of buildings and its partial revision in 2016 and GB 50010-2010 Code for design of concrete structures (2015 version) et al., considering feedbacks from engineering practice in recent years, contents in the drawing collection have been systematically revised, and details of CTa and CTb stairs with slide bearings, of which the stair slab consists of flight and upper landing slab, are included in this version. This drawing collection is applicable to cast-in-situ concrete slab-stairs in seismic design with seismic precautionary intensity 6~9. There are 12 types of cast-in-situ concrete slab-stairs in this drawing collection. Among these types, AT~GT stairs are applicable to stairs that are not considered in seismic analysis of main structures, and ATc stairs are applicable to stairs in frames that are considered in seismic analysis of main structures, while ATa, ATb, CTa and CTb stairs are applicable to stairs where sliding bearings are adopted to reduce the impact of stairs on main structures (frames).
16G101-2中文 7
目录 7
总说明 11
第一部分 平法制图规则 13
1 总则 13
2 现浇混凝土板式楼梯平法施工图制图规则 17
2.1 现浇混凝土板式楼梯平法施工图的表示方法 17
2.2 楼梯类型 17
2.3 平面注写方式 21
2.4 剖面注写方式 23
2.5 列表注写方式 25
2.6 其他 25
AT、BT型楼梯截面形状与支座位置示意图 27
CT、DT型楼梯截面形状与支座位置示意图 29
ET、FT型楼梯截面形状与支座位置示意图 31
GT型楼梯截面形状与支座位置示意图 33
ATa、ATb、ATc型楼梯截面形状与支座位置示意图 35
CTa、CTb型楼梯截面形状与支座位置示意图 37
第二部分 标准构造详图 39
混凝土结构的环境类别 混凝土保护层的最小厚度 39
受拉钢筋基本锚固长度ιab 抗震设计时受拉钢筋基本锚固长度ιabE 钢筋弯折的弯弧内直径D 41
受拉钢筋锚固长度ιa 受拉钢筋抗震锚固长度ιaE 43
纵向钢筋弯钩与机械锚固形式 纵向受力钢筋搭接区箍筋构造 纵向钢筋的连接 45
纵向受拉钢筋搭接长度lι 47
纵向受拉钢筋抗震搭接长度lιE 49
AT型楼梯平面注写方式与适用条件 51
AT型楼梯板配筋构造 53
BT型楼梯平面注写方式与适用条件 55
BT型楼梯板配筋构造 57
CT型楼梯平面注写方式与适用条件 59
CT型楼梯板配筋构造 61
DT型楼梯平面注写方式与适用条件 63
DT型楼梯板配筋构造 65
ET型楼梯平面注写方式与适用条件 67
ET型楼梯板配筋构造 69
FT型楼梯平面注写方式与适用条件 71
FT型楼梯板配筋构造(1-1剖面) 73
FT型楼梯板配筋构造(2-2剖面) 75
GT型楼梯平面注写方式与适用条件 77
GT型楼梯板配筋构造(1-1剖面) 79
GT型楼梯板配筋构造(2-2剖面) 81
FT、GT型楼梯平板配筋构造(3-3、4-4剖面) 83
ATa、ATb型楼梯平面注写方式与适用条件 85
ATa、CTa型楼梯滑动支座构造详图 87
ATa型楼梯板配筋构造 89
ATb、CTb型楼梯滑动支座构造详图 91
ATb型楼梯板配筋构造 93
ATc型楼梯平面注写方式与适用条件 95
ATc型楼梯板配筋构造 97
CTa、CTb型楼梯平面注写方式与适用条件 99
CTa型楼梯板配筋构造 101
CTb型楼梯板配筋构造 103
不同踏步位置推高与高度减小构造 105
各型楼梯第一跑与基础连接构造 107
AT-DT型楼梯施工图剖面注写示例(平面图) 109
AT-DT型楼梯施工图剖面注写示例(剖面图) 111
ATa型楼梯施工图剖面注写示例(平面图) 113
ATa型楼梯施工图剖面注写示例(剖面图) 115
ATb型楼梯施工图剖面注写示例(平面图) 117
ATb型楼梯施工图剖面注写示例(剖面图) 119
ATc型楼梯施工图剖面注写示例1(平面图) 121
ATc型楼梯施工图剖面注写示例1(剖面图) 123
ATc型楼梯施工图剖面注写示例2(平面图) 125
ATc型楼梯施工图剖面注写示例2(剖面图) 127
CTa型楼梯施工图剖面注写示例(平面图) 129
CTa型楼梯施工图剖面注写示例(剖面图) 131
CTb型楼梯施工图剖面注写示例(平面图) 133
CTb型楼梯施工图剖面注写示例(剖面图) 135
附录:词汇表 137
16G101-2English 8
Contents 8
General Instruction 12
Part One Drawing Rules of Ichnographic Representing Method 14
1 General Provisions 14
2 Rules of Ichnographic Construction Drawings of Cast-in-situ Concrete Slab-stairs 18
2.1 Representing method of ichnographic construction drawings of cast-in-situ concrete slab-stairs 18
2.2 Types of stairs 18
2.3 Ichnographic annotation method 22
2.4 Sectional annotation method 24
2.5 Tabulated annotation method 26
2.6 Others 26
Cross-section and supports of AT and BT stairs 28
Cross-section and supports of CT and DT stairs 30
Cross-section and supports of ET and FT stairs 32
Cross-section and supports of GT stairs 34
Cross-section and supports of ATa, ATb and ATc stairs 36
Cross-section and supports of CTa and CTb stairs 38
Part Two Standard Detailing Drawings 40
Environment classification for concrete structures Minimum concrete cover 40
Basic anchorage length lab, basic anchorage length labE of tension bars in seismic design and the inside diameter of hook D 42
Anchorage length la of tension bars Anchorage length laE of tension bars in seismic design 44
Hooks and mechanical anchorage types of longitudinal bars Stirrup detailing in the lap zone of longitudinal main bars Splice of longitudinal bars 46
Lap lengt ll of longitudinal tension bars 48
Lap length llE of longitudinal tension bars in seismic design 50
Ichnographic annotation method and application of AT stairs 52
Reinforcement detailing of AT stair slabs 54
Ichnographic annotation method and application of BT stairs 56
Reinforcement detailing of BT stair slabs 58
Ichnographic annotation method and application of CT stairs 60
Reinforcement detailing of CT stair slabs 62
Ichnographic annotation method and application of DT stairs 64
Reinforcement detailing of DT stair slabs 66
Ichnographic annotation method and application of ET stairs 68
Reinforcement detailing of ET stair slabs 70
Ichnographic annotation method and application of FT stairs 72
Reinforcement detailing of FT stair slabs (Section 1-1) 74
Reinforcement detailing of FT stair slabs (Section 2-2) 76
Ichnographic annotation method and application of GT stairs 78
Reinforcement detailing of GT stair slabs (Section 1-1) 80
Reinforcement detailing of GT stair slabs (Section 2-2) 82
Reinforcement detailing of the landing slab of FT and GT stairs (Section 3-3 and 4-4) 84
Ichnographic annotation method and application of ATa and ATb stairs 86
Detailing drawings of slide bearings of ATa and CTa stairs 88
Reinforcement detailing of ATa stair slabs 90
Detailing drawings of slide bearings of ATb and CTb stairs 92
Reinforcement detailing of ATb stair slabs 94
Ichnographic annotation method and application of ATc stairs 96
Reinforcement detailing of ATc stair slabs 98
Ichnographic annotation method and application of CTa and CTb stairs 100
Reinforcement detailing of CTa stair slabs 102
Reinforcement detailing of CTb stair slabs 104
Detailing of increasing and decreasing rise at different risers 106
Connection detailing between the first flight of stairs and foundations 108
Sectional annotation example of construction drawings of AT~DT stairs (plan) 110
Sectional annotation example of construction drawings of AT~DT stairs (section) 112
Sectional annotation example of construction drawings of ATa stairs (plan) 114
Sectional annotation example of construction drawings of ATa stairs (section) 116
Sectional annotation example of construction drawings of ATb stairs (plan) 118
Sectional annotation example of construction drawings of ATb stairs (section) 120
Sectional annotation example I of construction drawings of ATc stairs (plan) 122
Sectional annotation example I of construction drawings of ATc stairs (section) 124
Sectional annotation example II of construction drawings of ATc stairs (plan) 126
Sectional annotation example II of construction drawings of ATc stairs (section) 128
Sectional annotation example of construction drawings of CTa stairs (plan) 130
Sectional annotation example of construction drawings of CTa stairs (section) 132
Sectional annotation example of construction drawings of CTb stairs (plan) 134
Sectional annotation example of construction drawings of CTb stairs (section) 136
Appendix:word list 138